Car, Vehicle Tracker-with CE and RoHS (TK103)

5 Usage
5.1 SIM card installation
Make sure that there is no call transfer and call display is on, and PIN code off. The SMS message must in Text format, can't be identified for PDU format.
5.1.1 Put SIM card into card box.
5.1.2 Put the card box into host as picture.
5.2 GPS Vehicle Tracker Installation
GPS/GSM/GPRS tracker should be installed by technical professional of local service centre. Without
Permission, the user can't repair and move the tracker randomly. If users do, any unfortunate damage should be compensated by himself.
5.2.1 Install Wire Box

5.2.2 GPS Vehicle Tracker Installation

Installation steps (caution: The following installation should under no power, otherwise will be dangerous)

5.3 Startup
5.3.1 Installed the tracker in the car, then put the SIM card into the tracker host outdoors.
5.3.2 For first use, please initialize the unit and restore it to default setting. ( please refer to 5.4 for instruction. )
5.3.3 or 40 seconds, the unit will begin to work and acquire the GSM signals as well as the GPS signals, and the red indicator will keep flashing every 2 seconds when the GPS module is in standby mode. When the blue indicator is keep shine, the unit has been located.
5.3.4 When this unit receives GPS signals normally, you can use it and do all the following settings.
5.4 Initialization
Send "begin+password" in SMS to the unit, it will reply "begin ok" and initialize all the settings. (Default password: 123456)

5.5 Change the password
5.5.1 Send SMS "password+old password+space+new" password to change the password.
Remark: Make sure the new password is in 6 digits, or else the tracker can not recognize the password.
5.5.2 you can Send "resume+password" to the tracker, to restore the original setting in case of losing the new password.
5.6 Authorization
There are only 4 numbers able to be authorized.
5.6.1 Call the tracker for 10 times, it will make the cell phone number as the authorized number automatically.
5.6.2 Send SMS "admin+password+space+cell phone number" to set up a authorized number. The other authorized numbers should be set by the first authorized number. If the number is successfully authorized, the unit will reply "admin ok! " in SMS.
5.6.3 Send SMS "noadmin+password+space+authorized number" to delete the authorized number.
5.6.4 For roaming purpose, you have to add your country code ahead of the cell phone number, for example, please "send admin123456 008613311113333" to tracker to set 13311113333 as an authorized number.
5.7 Real-time polling
5.7.1 If there is no authorized number, when any number dials up the unit, it will report a Geo-info; If there is already an authorized number, then it will not respond when an unauthorized number calls it up.
5.7.2 When an authorized number dials up the unit, it will hang up and report a real-time Geo-info as below:

5.8 Auto Track
Report a Geo-info at 30s intervals to the authorized numbers for 15 times:
5.8.1 Set up: Send SMS "at30sum15 " to the unit, it will report the Geo-info at 30s intervals for 15 times. The setting must be maximum 65535 in value.
5.8.2 Send SMS "at30sum0" to the unit, it will reply SMS heaps of times.
5.8.3 Cancel: Send noat+password to delete the "auto track".
5.9 Remote control oil and circuit
5.9.1 Control oil
Send SMS "stopoil+password" to control oil. For example send SMS: Stopoil123456
To supply the oil again, send SMS "supplyoil+password" to the unit.
5.9.2 Control circuit
Send SMS "stopelec+password" to control circuit. For example send SMS: Stopelec123456
To supply the circuit again, send SMS "supplyelec+password" to the unit.
If there is no authorized number, all number can control. If there is already an authorized number, only the authorized number can control.