Remote Dog Training Vibration Sound Control Collar--with CE and R& TTE (E154)

E-154 Remote Control Training User's Manual
Features:
§ Ideal for call or training pets,
Uses vibration instead of static stimulation
§ 2 levels of vibrations and whistle,
150 yard range
§ Receiver uses 2PCS AAA 1.5-v battery;
Transmitter uses 1PCS 23A 12
Transmitter Specs: Receiver Collar Specs:
§ Height: 86/ Width: 36 / Depth: 18mm
Height: 32 / Width: 53/ Dept: 30mm
§ Weight: 60g.
Weight: 100g.
§ Frequency: 433.825 MHz
Collar: W 3/4"— L1 6"
§ Red light on face
Red Light on side
§ Screw off battery cover and belt clip on back
Waterproof
The remote controller and receiver of the machine apply automatic matching technology, and the receiver will make sound when the batteries are installed in the receiver, then press any key of the remote controller and the receiver will make continuous sound, which shows it has successfully received the signal from the remote controller, and the remote controller may work normally.
If the receiver doesn't make sound when installing batteries, please remove the batteries, and then install again 10 seconds later.
A. Before using the product
1. Confirm that batteries have been installed in the remote controller and the receiver.
2. Checking the remote controller: Press the buttons on the remote controller respectively. The indicator light will be on. If the indicator light doesn't work or gives dim light, change the batteries.
3. Checking the receiver: The vibration induction switch being installed, when the receiver is shaken, the power will be connected automatically and the receiver will be on standby. While the receiver keeps still for over 5 minutes, the power will be cut automatically for saving energy.
4. Connect the collar with the receiver. Adjust the length of the collar so as it fits the neck of the pet. The proper tightness should be that you can put a finger in.
5. Respectively press the high frequency/low frequency vibration buttons on the remote controller. The receiver will make high frequency/low frequency vibration.
6. Press the Sound button on the remote controller and the receiver will make the sound of B-B. You can train the pet to take your orders by different tempos. Every order must have a fixed tempo. An insisting training will bring you a wonderful effect. For example, "three B-B" sounds mean "coming back".
7. Press the Light button on the remote controller and the receiver will give flashes of light, facilitating looking for your dog at night.

E-154Remote Control Training User's Manual
B. Operation Instructions:
1. Switch the power switch of the remote controller to the "ON" position. Be sure to turn it to "OFF" when you are not using it for fear of false action.
2. Open the inserting buckle of the collar and attach it to the neck of the pet. Adjust the tightness of the collar. It is proper that you can put a finger in.
3. Pets will most likely fell uncomfortable when the collar is first put on them. At this time, you should not hurry to use the vibration function. Don't use this function until you are sure the pet gets accustomed to the collar. High frequency vibration is used to curb the improper deeds of pets. Don't use this function casually or for fun.
4. You may use the "weak vibration" to page your dog silently and in long distance. You may also convey your order with the "B-B" sound.
5. The flashes of light allow you to look for your dog easily at night.
6. When you don't use the product, please take down the collar and the receiver and put them in a place without vibration, so as to prolong the lifetime of the batteries.
7. If you don't use the collar receiver for a long time, please take out the batteries.